The cabinet base, as its name implies, is the support under the cabinet. I wonder if you have any understanding of the products essential to the installation of this cabinet? Today, let's popularize the application and specifications of the cabinet base, taking the cabinet base of Xinshangpin Technology as an example.
The base of the cabinet is used to install and support the cabinet, which solves the problems such as the uneven ground of the machine room, the unchanged installation construction caused by the complex pipeline site, the harsh environment, and the cabinet soaking caused by water leakage on the ground. In fact, generally speaking, it means lifting the cabinet off the ground, which can avoid many problems.
The cabinet base is divided into two categories: integrated base and single base. The integrated base can also be divided into several types of base materials, such as C-shaped steel, aluminum profiles, and sheet metal. A single base can also be divided into two types of bases: sheet metal and angle steel.
So today we will explain the characteristics of the conjoined base and the three materials of the conjoined base.
1. Features of integrated base
Since the integral cabinet base has been partially or integrally welded before delivery, it can be installed after simple operation on site, which can save construction period and greatly improve efficiency.
When the machine room adopts raised floor, the cabinet should be equipped with a "cabinet base" to solve the problems of uneven ground, harsh environment and air convection.
When laying the new machine room, it is better to adopt the method of connecting the base. The utility model has the advantages of high universality, low cost, on-site laying, convenient adjustment, etc.
Integrated base
2. Material of connecting base
C-shaped steel base: applicable to new machine room
a. C-shaped steel is formed at one time, with material thickness of 1.8~2mm;
B. Bulk delivery, less space occupation and low transportation cost;
c. Screw and nut assembly on site, no hot work required, high safety factor, two-piece installation, and then adjust the height of the nut for quick installation;
d. The adjusting height of the nut is large (adjustable range ± 30);
e. It can be used together;
f. Sheet metal forming, low raw material cost;
G. The installation hole with the cabinet can be customized;
h. Capable of bearing 2 tons;
Aluminum profile base: applicable to new machine room
a. One time forming of aluminum profiles;
b. Bulk delivery, less space and low transportation cost;
c. Screw and nut assembly on site, no hot work required, high safety factor, two-piece installation, and then adjust the height of the nut for quick installation;
d. The adjusting height of the nut is large (adjustable range ± 30);
e. It can be used together;
f. The aluminum profile has high strength;
g. And cabinet mounting holes can be customized;
h. It can bear 2.2 tons
Sheet metal base: applicable to new machine room
a. The sheet metal design can be customized and is suitable for the expansion of the machine room;
b. Bulk delivery, taking up less space;
c. Screw and nut assembly on site, no hot work required, high safety factor;
d. Simple structure and convenient assembly;
e. It can be used together;
f. And cabinet mounting holes can be customized;
g. Capable of bearing 2 tons;
h. The horizontal adjustment can be equipped with shims or support feet
After knowing about the integrated chassis of the cabinet, do you have more confidence in the selection of chassis? Next time, we will explain the characteristics, materials and application range of the single base. As for how to choose, it depends on your own needs. Of course, you can also discuss with us directly and give the most sincere and satisfying suggestions!
mesh cable tray
INICIO